How do I verify the power and SCSI connections to the tape drive?
Answer:
Interconnect Verification
Precautions
* Switch off the host computer and peripherals before connecting the SCSI cable
* Make sure the SCSI connectors are pressed tightly together
* If this unit is the last (or only) device on the SCSI bus, make sure to connect a SCSI bus terminator to open connector
* The total length of the SCSI cable(s) between the host computer and last device should be less than 3 meters
* To set up the LVD configuration, you need: 1) Host PC with the LVD Scsi Board, 2)only LVD devices on the Scsi bus and 3) LVD/SE switchable terminator.
Was the information on this page helpful?:
Select an option