Why do I get the "ASPI Manager not found or not responding" error message while using Spressa Backup with my SCSI drive?
Answer:
You'll want to take the following steps. Lower the rate at which data is transferred to the backup device from the SCSI BIOS to 5MB/sec. (Refer to your hardware manual for instructions.) Ensure that the SCSI backup device has a lower SCSI ID setting than the CD-Rom installed on the system. Contact your hardware vendor for the latest BIOS or Firmware for you SCSI adapter card, and get the latest Windows. miniport driver for your SCSI Controller.
Was the information on this page helpful?:
Select an option